Welcome to The Best Buy Waterproofing

Arlington, VA Spray Foam Insulation

Closed-cell spray foam for Arlington basements and crawl spaces that seals drafts, limits condensation and helps the floors above stay warmer.

Spray Foam Insulation Contractors in Arlington, VA

Best Buy Waterproofing installs spray foam insulation in Arlington, VA in basements and crawl spaces, the parts of the house where cold air and moisture usually find their way in. Spray foam goes on as a liquid, expands into cracks and uneven surfaces, and cures into a continuous layer that insulates and air seals at once. That makes it a good match for the spots where fiberglass struggles, such as rough brick and block basement walls, leaky rim joists and damp crawl spaces. We work only below grade, and we use closed-cell foam because it stands up to moisture.

Arlington homes ask a lot of their lower-level insulation. Many colonials, Cape Cods and bungalows from the 1920s through the 1950s were built long before air sealing was a priority, and their foundations leak air at every gap. Humid summers push damp air against cool masonry, while freeze-thaw winters draw heat out through the rim and sill. Because our in-house team also handles waterproofing, crawl space repair and mold remediation, we plan insulation around keeping the space dry. Every project starts with a free inspection.

Signs You Need Spray Foam Insulation in Arlington

Below-grade insulation problems usually show up as comfort complaints or damp spots long before anyone inspects the basement. If you notice any of these in your Arlington home, it is worth a look.

Cold first-floor rooms

Floors over an uninsulated basement or crawl space stay chilly all winter long.

Drafts near the sill

Cold air seeps in along the top of basement walls and around the rim joist.

Climbing energy bills

Heating and cooling run longer than they should to keep the house comfortable.

Condensation on walls

Sweating masonry or damp framing means humid air is meeting cold surfaces.

Musty lower level

Damp basement or crawl space air often brings a musty smell upstairs.

Failing fiberglass

Batts that sag, fall or hold water have stopped insulating effectively.

Spray Foam Insulation Solutions for Arlington Homes

Basement Wall Insulation

Brick and block basement walls stay cool for most of the year, and during an Arlington summer that cool surface is exactly where condensation forms. For basement insulation, closed-cell spray foam is applied directly to the masonry, where it bonds tightly and fills irregular mortar joints. Because it resists water and works as a vapor barrier, it keeps humid indoor air from reaching the cold wall. That helps reduce sweating, musty odors and the damp conditions that encourage mold.

It is a sound choice before finishing a basement or building out a basement apartment, since it can sit behind new framing. We check the walls for leaks first, because spray foam does not replace waterproofing.

Rim Joist Insulation

The rim joist is the band of framing that rests on top of your foundation wall, and in many older Arlington houses it is one of the leakiest areas in the entire home. It is often stuffed with a loose fiberglass batt, or left bare, so outside air slips in around the sill plate and through gaps in the framing. Rim joist insulation with closed-cell spray foam fills every uneven pocket between the joists and covers the wood in a single pass.

Sealing this band cuts drafts, warms the floors above and limits the condensation that can lead to rot along the sill.

Crawl Space Insulation

Crawl spaces beneath ramblers, rear additions and sunrooms face the same clay-heavy soil and humid air that affect basements, and ordinary fiberglass tends to soak up that moisture and fail. Our crawl space insulation approach depends on how the space is set up. In a vented crawl space, we insulate the underside of the floor between the joists. In a sealed crawl space, we insulate the foundation walls and close the vents, which brings the space inside the home’s envelope.

Insulation works best over a dry crawl space, so we can pair it with a vapor barrier or encapsulation in one plan.

Air Sealing Below Grade

Insulation only performs as well as the air sealing around it. On every basement or crawl space job, we seal the gaps and penetrations where outdoor air gets in: the sill plate, openings around pipes and wires, duct penetrations and crawl space access doors. Spray foam expands into those odd-shaped openings and seals them in a way batts and caulk often cannot match.

Less air moving through the foundation means fewer drafts, warmer floors and less strain on your heating and cooling. It also closes common entry points for insects and rodents.

Why We Use Closed-Cell Foam Below Grade

Closed-cell spray foam is dense and rigid, with cells that stay sealed after it cures. That structure lets it resist water, act as a vapor barrier and deliver more insulating value per inch, which matters in shallow rim joist bays and low crawl spaces where every inch of clearance counts.

Those traits suit damp, below-grade spaces in Arlington, where humidity and condensation are the main enemies of insulation. During your inspection we explain where the foam will go, how thick it needs to be and how it fits with any moisture work your home needs.

Insulation as Part of a Dry Plan

Foam on a wet wall only hides a problem. If water is seeping through the foundation or pooling in a crawl space, we address that first with waterproofing, drainage or encapsulation, then insulate. Because one in-house team handles all of it, the work is sequenced correctly and nothing gets covered up before it is fixed.

The result is a lower level that stays drier and feels warmer.

Our Spray Foam Insulation Process

1

Free Inspection

We check moisture, air leaks and existing insulation in your basement or crawl space.

2

Your Recommendation

We walk you through what we found and what we recommend, area by area.

3

Foam Application

We prep surfaces, remove failed insulation, apply the foam, check coverage and clean up.

4

Warranty Protection

You receive documentation and our transferable warranty for added peace of mind.

Why Arlington Homeowners Choose Best Buy Waterproofing

We bring a waterproofing contractor’s understanding of moisture to every spray foam insulation project in Arlington. We insulate only basements and crawl spaces, and we plan each job around keeping those spaces dry.

What Affects the Cost of Spray Foam Insulation in Arlington?

We don’t price spray foam insulation from a list, because every Arlington basement and crawl space is built a little differently. After your free inspection, you get a firm price based on what your home needs.

Area to insulate

How much basement wall, rim joist or crawl space surface needs foam.

Foam thickness

The depth of foam each area needs to meet comfort and moisture goals.

Access to the space

Low crawl spaces, tight stairs and crowded basements take more preparation.

Moisture problems

Leaks, wet wood or mold may need attention before foam is applied.

Old insulation removal

Wet, sagging or damaged batts may need to come out first.

Air sealing scope

The number of gaps and penetrations to seal along the foundation.

Spray Foam Insulation FAQs

We install spray foam insulation in basements and crawl spaces only. That includes basement walls, crawl space walls, the underside of crawl space floors and rim joists, along with air sealing at gaps and penetrations. We focus below grade because that is where insulation and moisture control overlap, and where our waterproofing experience helps most.

We use closed-cell spray foam. Its sealed cells resist water and act as a vapor barrier, so it holds up against the humidity and condensation common in Arlington basements and crawl spaces. It also delivers strong insulating value in a thin layer, which helps in tight rim joist bays and low crawl spaces.

Sealing air leaks along the foundation and rim joists reduces the load on your heating and cooling system, so many homeowners notice warmer floors and lower energy bills. Results depend on your home’s size, age and existing insulation. We point out the biggest leaks we find during the free inspection.

No. Spray foam controls condensation and air movement, but it is not waterproofing. If water is seeping through your walls or floor, that needs to be fixed first, or the foam may hide an ongoing leak. Our team also handles basement waterproofing, so we can take care of both in the right order.

Often, yes. Older houses in neighborhoods like Lyon Park and Westover tend to have uneven brick or block walls, open rim joists and gaps that batts cannot seal. Because foam expands into irregular spaces, it closes areas fiberglass misses. We inspect the masonry and framing first so the foam goes onto a sound, dry surface.

We ask homeowners to stay out of the treated area while the foam is applied and while it cures, and we let you know ahead of time how long that will be for your project. Afterward, we check coverage and adhesion, clean up and walk you through the finished work.

More Services in Arlington

Crawl Space Repair in Arlington, VA

Basement Finishing in Arlington, VA

Basement Waterproofing in Arlington, VA

Spray foam insulation near Arlington, VA: Alexandria · Falls Church · McLean · Washington, DC · Vienna · Fairfax · Annandale

Book a Free Spray Foam Inspection

Want a warmer, drier basement or crawl space? Schedule a free inspection and we will show you where your Arlington home is losing air below grade and where closed-cell foam can help. Call (844) 980-3707 today.

Scroll to Top